AMADA CS-220 (used)


Location: 401 Supor Blvd, Harrison, NJ 07029, United States

Machine state: used

Product Description

(1) Preowned 8-5/8" x 8-5/8" x 1/8" AMADA Hydraulic Notching Machine, Model CS-220,
S/N (New 1980)
Rated tonnage   <font face=Times-Roman size=3>10 ton
Maximum cutting length<font face=Arial size=3>  8-5/8"
Maximum cutting thickness (mild steel)
 1/8" (10 gauge)
Strokes per minutesize=3>  36
Stroke length   <font face=Times-Roman size=3>7/8"
Hydraulic pump output<font face=Arial size=3>   5.8 gallons/minute
Oil pressure  <font face=Times-Roman size=3>1,000 psi
Oil tank capacitysize=3>   16 gallons
Equipped With:
Twin work guides, the position of which is indicated by a vernier scale. A thumbwheel
is provided for fine adjustment. A positive setting pin facilitates rapid setup at 45°,
90° , and 135° to the notching blade.
Front located operator's control station with a selector switch for Single
Cycle/Continuous mode of operation
Adjustable timer from 0 to 10 second delay in Continuous mode
Remote electric foot pedal for actuation of ram
Scrap chute
LUBE-MATIC manually operated one shot lubrication system
3 H.P. 3/60/220-440 volt hydraulic pump motor and tank
Machine is wired for 220 volt operation
Approximate Weight:size=3>  2,000 Lbs.
Approximate Dimensions:<font face=Arial size=3>
47" L-R x 36" F-B x 48" H
Price (F.O.B. Truck, Harrison, NJ): $6,950.00
If additional information is required, please contact us.