AMADA CM-100-AN (used)


Updated: 06.05.2016 15:17:26

Year: 1999

Location: Warren, MI

Machine state: used

Product Description

LocationWarren, MI
PriceContact Seller
ManufacturerAmada saws
Motor10/15 HP
Weight5,400 lbs.
Stock NumberW-1434
Voltage220 Volt, 3 ph
DivisionMetal Fabrication
Dimensions66” x 85” x 60” (not including magazine)
Blade diameter3.937"
Cutting speeds70 or 100 RPM
Main saw motor10/15 HP
Saw blade feedHydraulic motor and ball screw
# of multi strokesInfinite to 999,999”
Saw blade dimensions360mm x 2.6mm x 40mm bore
Minimum remnant length2.8”
Model cm-100-an ♦ year1999
Automatic feed length (one stroke)0.2” – 23.6”
Cutting capacity, round solid @ 90 deg0.8” – 3.937”
Cutting capacity, square solid @ 90 deg0.8” – 3.150”
CategorySaws in United States
SubcategoryFerrous, carbide

This AMADA Metal Sawing Machine incorporates the latest technologies of carbide circular metal sawing blades with State of the Art machine designs. This combination has proven to give unequaled performances in metal sawing. The
CM-100AN utilizes a disposable carbide saw blade for the most economical and efficient metal sawing operation. These features coupled to a bundle incline magazine for continuous cutting, produce the lowest possible cost per square inch of metal removal ever achieved. Unsurpassed accuracy and high quality end finishes help to decrease cost by eliminating secondary operations in many instances.
Carbide stabilizing pads for the saw blade and a complete enclosure around the machine enable the CM-100AN to produce high production rates while maintaining noise level well within the acceptable limits.
The mist system and an automatic chip conveyor help to keep an extremely clean machine and adjacent areas.
Cutting Capacity, Round Solid @ 90 deg: 0.8” – 3.937”
Cutting Capacity, Square Solid @ 90 deg: 0.8” – 3.150”
Saw Blade Dimensions: 360mm x 2.6mm x 40mm bore
Automatic Feed Length (one stroke): 0.2” – 23.6”
# Of Multi Strokes: Infinite to 999,999”
Minimum Remnant Length: 2.8”
Cutting Speeds: 70 or 100 RPM
Saw Blade Feed: Hydraulic motor and ball screw
Main Saw Motor: 10/15 HP
Voltage: 220 Volt, 3 ph
Dimensions: 66” x 85” x 60” (not including magazine)
Weight: 5,400 lbs.
Extended 25’6” Incline Type Loading Table for Continuous Cutting
Optional “Mist Buster” Unit
Auxiliary Staging/Unload Table
Vertical Top Clamp
Chip Removal Conveyor
Length Setting by Direct Readout
Anti Backlash Device for Maximum Blade Life
Carbide Stabilizer Pads to Eliminate Blade Run-Out
Cut Piece Counter
Ammeter Monitoring Main Motor Amp Draw
Controlled Mist System (Eliminates Flood Coolant)
Sorting Device to Separate Trim and Remnants from Good Pieces
Self-Diagnostics by Error Codes
Wire Brush for Chip Removal
Brake Pressure Readout